

View all FAQs
How do I change my cylinder? (Steam Units Only)
- Category:Humidifiers
These instructions can also be found on page 22 of the Elite Steam Installation / Owner's Manual.
- Completely drain the cylinder by pressing and holding the "drain" button.
- Turn the humidifier off and disconnect the main power.
- Remove the cover.
- DS Models: Remove steam hose from cylinder, flip up the cylinder holding bracket.
- RS Models: Remove 2 bolts of the embedded fan, flip up cylinder holding bracket.
- Disconnect the distributor from the cylinder and lift the cylinder out of the unit.
- Disconnect the electrical connection from the top of the cylinder, and re-connect to the NEW cylinder.
- Install the new cylinder, performing these steps in reverse.